Haicam E21/E22/E23 factory default

  1. Power off your camera
  2. Power on your camera
  3. Wait for about 40 seconds
  4. When you hear a beep from th camera, then press and hold the "RESET" button for 10 seconds untill you hear a "beep" from the camera.
  5. The factory setup is successful now, waiting for the camera to restart. That will take about 40 seconds.
  6. The camera will have one beep after factory default (If there are another 3 beeps followed, please do the steps above again)
  7. Check your phone or computer's wifi settings, you will find the camera's WiFi AP name: AP-E21/E22/E23-XXXXXX-XXXXX (your camera device ID)
  8. If you couldn't find the camera's AP name in your phone's WiFi settings, please do the steps above again. (In some phones or computers, you may not see the camera's AP name)